How do you connect to news groups when using an ISP to
connect to the internet?
Contact
inter-NIC for connection information
Open
Control Panel and select the news group option
Obtain
the IP address for the NNTP server from the ISP
Contact
the ISP and get IP address of the FTP server.
A user is connected to Internet through an ISDN
connection. He visits three different sites. Suddenly a message is given
indicating that the site is unavailable. What might be the problem?
The
host server is down
The
local IP has changed
The
host protocol is incorrect
The
NetBEUI time exceeded
Which protocol is used by World Wide Web?
FTP
HTTP
SMTP
SMTS
What is the main function of a WINS server on the
network?
It
assigns IP addresses
It
assigns computer names
It
resolves NetBIOS names to IP addresses
It
allows dual booting between operating systems
A customer wants to set his new computer to use a
data/fax internal modem to dial up to an internet service provider (ISP). He
has joined the ISP and has all of the ISP information. What should you do
first to accomplish this goal?
Obtain
an ISP account after installing PPP and dial up networking
Install
dial up networking in TCP/IP and setup all appropriate settings
Install
PPP and dial up networking after establishing a new account with an ISP
Obtain
an account from an ISP then reinstall the modem TCP/IP and dial up
networking
In Windows 2000 where should you go to join a group or
domain?
Membership
manager
Network
and dial up connections
Device
Manager
System
properties
How do most of FTP servers authenticate users?
Securely
Nominally
Individually
Anonymously
In a peer to peer network printing demands are slowing
the network terminals. One quick remedy for the problem would be to?
Install
more memory on the network printers
Disable
printing on one computer that is connected to the network
Set
one of your computer systems to work as a network print server
Try
to run your print jobs after hours when there is less network
traffic
A customer use a Windows 98 machine with a 20BG hard
drive formatted with FAT32 and tries to install an old DOS program but gets an
error message that there is not enough space on the hard drive. According to
the drive properties more than 12GB free space is remaining on the drive. What
is wrong?
Windows
98 is not reporting free space properly
The
DOS program does not recognize a FAT32 partition
Windows 98 does not support any legacy DOS programs
The
partitions on the primary hard drive are not set to active
A user calls and complains that a system bought years
ago has USB ports build in, but when a new USB mouse in plugged in the system
it does not recognize that a device has been added. What do you suspect is the
problem?
The
system is running Windows 95
The
system does not have the drivers loaded properly
The
device was plugged in the machine while it was running
he
device was plugged in while the machine was off and then booted
A client calls and tells you that while he was
installing Windows 98 the system files could not be updated and the system
hung. What should be disabled in order to install a system upgrade?
Drive
compression.
Fast
booting the BIOS
Antivirus
feature in the BIOS
Plug
and Play in the BIOS
After a RAM upgrade to a Windows 9x operating system a
user experiences random lockups and program errors. You suspect that the new
memory is at fault. How can you quickly test extended memory?
Restart
and use the Maintenance Wizard
Restart
in Safe mode and run Dr. Watson
Use
an emergency boot disk with himem.sys
Close
all programs and open System information
On a Windows 9x system all that is seen are truncated
file names instead of actual long filename. What utility is being used?
File
Manager
System
Editor
Program
Manager
Windows
Explorer
A Windows 95 Computer is upgraded to Windows 2000. After
restarting the computer for the first time, one of the applications is no
longer working. What should be done?
Run
SCANREG
Run
MSCONFIG
Run
REGEDIT32
Reinstall
the application
Your customer can only connect with a speed of 28.8Kbps
even with a 56Kbps modem. The Internet Service Provider (ISP) only uses
V.90/X2 modems. What should you suggest?
Disable
V.90 in the modem properties
Check
the internet for the latest v.90 updates for the modem
Replace
the existing modem with an X2 modem V.90 modem and connect only at 28Kbps
Optimize
the dial up setting because modem speeds faster than 28.8Kbps can only be
achieved under the most ideal conditions